Men's pants
All of our pants are measured in inches around the waist and like our jackets they come in two inch increments. This is the same as most men’s and some women’s jeans i.e. 28”, 30”, 32” etc…
To measure your waist size, take a tape measure and measure around the narrowest point of your waist which is usually above your hips. Do not pull the tape too tight.
If you do not have a tape measure click here for a printable pdf tape measure that you can cut out and stick together with tape!
Once you know your waist size in inches order a pair of pants that are one size up for example if you measure 29” then order a pair of 30” pants. If you measure just below or exactly on a size eg 30” or 29¾” then you should usually go up a size to 32” unless you like a tight fit.
To double check that you are the correct height for your chosen waist size use the chart below. Read along the top of the chart to find your waist size and then follow down it to find your height as long as there is a tick in this box you should be fine.
If you would like further details including sizes converted to cm and the actual inside leg, waist and hip measurements of each size please click here |
